Requests and traversal

Description

How does Zope handle requests and translate paths to published objects?

What happens when a request is received?

A request is recieved either via a WSGI pipeline or the Medusa web server. Using Medusa, it first hits handle_request() in the zhttp_handler used by zhttp_server, which consumes the request until it has enough to act on it, at which point continue_request() is called. This constructs a ZPublisher.HTTPRequest from the Medusa http_request environment and prepares a ZServerHTTPResponse, a subclass of ZPublisher‘s HTTPResponse.

The actual request is delegated to a threadpool. In a non-WSGI setup, this is managed by ZServer.PubCore.ZRendezvous.ZRendevous (note the typo in the module name!). This keeps track of the requests and (skeletal) responses to be processed, and passes them to an instance of a ZServer.PubCore.ZServerPublisher for handling. ZRendevous also deals with thread locking.

The ZServerPublisher will call either ZPublisher.publish_module or ZPublisher.WSGIPublisher.publish_module, depending on the deployment mode, with the request and the response. The non-WSGI version also takes a module name to publish, which is Zope2. This is a relic of the Bobo publisher, which could publish other modules with a bobo_application variable set (recall that this variable was set in the startup phase described above).

The remainder of this section will describe the non-WSGI publisher. The WSGI publisher performs the same actions, but deals in WSGI environs and response body iterators.

There are two versions of publish_module, one with profiling and one without. publish_module_standard (without profiling) performs the following actions:

• Set the default ZTK skin on the request, by adapting the request to IDefaultSkin.
• Call publish(), which does the real publication.
• Handle errors.
• Write the response body to stdout, which is wired up to be the HTTP response stream.

The more interesting function is publish(). This starts by calling get_module_info() to get the information about the published module (which, recall, is almost always going to be Zope2). The results are cached, so this will only do its work once:

(bobo_before, bobo_after, object, realm, debug_mode, err_hook,
 validated_hook, transactions_manager)= get_module_info(module_name)

The returned variables are:

• bobo_before, set via a module level variable __bobo_before__. This is a callable that will be invoked immediately before publication.
• bobo_after, set via a module level variable __bobo_after__. This is a callable that will be invoked immediately after publication.
• object to publish, which defaults to the module itself, but can be set via the module-level variable bobo_application (or web_objects)
• realm, set via the module level variable __bobo_realm__, or a global default which can be set the ZConfig configuration file.
• debug_mode, a boolean set using the module level variable __bobo_debug_mode__.
• err_hook, set via the module level variable zpublisher_exception_hook. This is used to handle error responses (more below).
• validated_hook, set via the module level variable zpublisher_validated_hook. This is used to initialise a security manager once authentication and authorisation have taken place (more below).
• transactions_manager, set via the module level variable zpublisher_transactions_manager, but defaulting to the DefaultTransactionsManager which uses the transaction API to manage transactions.

The publisher then performs the following steps:

• Notify the ZPublisher.pubevents.PubStart event.

• Create a new zope.security interaction.

• Call processInputs() on the request to process request parameters and the request body so that the Zope request object works as advertised.

• If the request contains a key SUBMIT with the value cancel and a key cancel_action with a path, a Redirect exception is raised, which will cause an HTTP 302 redirect to be raised.

• Set debug_mode and realm on the response, as returned by get_module_info().

• If bobo_before() is set, it is called with no arguments.

• Set the inital value for request['PARENTS'] to be the published object. This will be the ZApplicationWrapper set during the startup phase.

• Begin a transaction using the transactions_manager.

• Traverse to the actual object being published (e.g. a view) by calling object=request.traverse(path, validated_hook=validated_hook), where path is request['PATH_INFO']. More on traversal below.

• Notify the ZPublisher.pubevents.PubAfterTraversal event.

• Note the path and authenticated user in the transaction.

• Call the object being pusblished using mapply():

  result=mapply(object, request.args, request,
                call_object,1,
                missing_name,
                dont_publish_class,
                request, bind=1)
  

  The ZPublisher.mapply.mapply() method is somewhat complicated, but in essence all it does is to call either a published method, or a published instance with a __call__() method.

  request.args can contain positional arguments supplied in an XMLRPC call, but is usually empty. The request is passed to act as a dictionary of keyword arugments, which allows request parameters to be turned into method parameters to a published method.

  The other parameters are about policy - we call any object (e.g. a method or object with a __call__ method) to resolve it, but we don’t publish class objects (which would in effect instantiate them). We do allow binding of self for methods on objects, and we pass the request as context for debugging.

• Set the result of the mapply() call as the response body. As a marker, the response object itself can be returned from the callable that mapply() invokes to bypass this behaviour, i.e. if the published object set the response body itself.

• Notify the ZPublisher.pubevents.PubBeforeCommit event.

• Commit the transaction using the transactions_manager.

• End the zope.security interaction

• Notify the ZPublisher.pubevents.PubSuccess event.

• Return the response object, which is then used by the ZServer to write to stdout.

If an exception happens during this process, the err_hook is called. This is allowed to raise a Retry exception. Regardless, the event ZPublisher.pubevents.PubBeforeAbort is notified before the transaction is aborted, and then ZPublisher.pubevents.PubFailure is raised after the zope.security interaction is ended.

If the request supports retry, it will be retried by cloning it an calling publish recrusively. All HTTP requests support retry, but only up to a limit of retry_max_count, which by default is 3. Retry is mainly used to retry in the case of write conflict errors.

If there is no error hook installed, a simple abort is encountered, with no retry.

The default error hook is an instance of Zope2.startup.ZPublisherExceptionHook. This handles exceptions by performing the following checks:

• SystemExit or Redirect exceptions are re-raised.
• A ConflictError, which indicates a write-conflict in the ZODB, is turned into a Retry exception so that request can be retried.
• Other exception are stored in the __error_log__ acquired from the published object, if possible.
• If a view named index.html is registered with the exception type as its context, this is resolved and returned as the response.
• If the published object or any of its acquisition parents have a method raise_standardErrorMessage(), this will be called to create an error message instead of using the view approach. This is called with a first argument of whichever object in the acquisition chain has an attribute standard_error_message, as well as the request and traceback information.

When handling an exception by returning an error message, the ZPublisherExceptionHook will call response.setStatus() with the exception type (class) as an argument. The name of the exception class is then used to look up the status code in the status_reasons dictionary in ZPublisher.HTTPResponse. Hence, raising an exception called NotFound will automatically set the response code to 404.

How does publication traversal work?

Traversal is the process during which the path elements of a URL are resolved to an actual object to publish (there is also path traversal, used in TAL expressions in page templates, which is similar, but implemented differently - see below).

Traversal is invoked during object publication, which calls request.traverse() with the path from the request (the PATH_INFO CGI variable). This method is inordinately complicated, mostly because it caters for a lot of edge cases. The basic idea is pretty simple, though: each path element represents an item to traverse to from the preceding object (its parent). Traversal can mean dict-like access (__getitem__), attribute-like access (__getattr__), or one of a number of different hooks for overiding or extending traversal. Once the final element on the path is found, the user’s access to it is validated, before it is returned to be passed to mapply().

Here are the gory details:

• Clean up the path up by stripping leading and trailing slashes, explicitly disallowing access to things like REQUEST, aq_base and aq_self, and resolving . or .. elements as in filesystem paths.

• Check if the top-level object (the application root) has a __bobo_traverse__ method (it almost certainly will - as shown above, there is a wrapper around the application root that implements this method to open and close the ZODB connection upon traversal). If so, call it to obtain a new top level object (which will be the real Zope application root in the ZODB).

• Aquisition-wrap the top-level object in a RequestContainer. This is the fake root object that makes it possible to acquire the attribute REQUEST from any traversed-to context.

• Record the request variable ACTUAL_URL, which is the inbound URL plus the original path. Hence, this variable provides access to the URL as the user saw it.

• Set up (and later, pop from) the request variable TraversalRequestNameStack. This is a stack of path elements still to be processed. Traversal hooks sometimes use this to look ahead at the path elements that have not been traversed to and, in some cases, modify the stack to trick traversal into going somewhere other than what the inbound path specified.

• In a loop, process the traversal name stack:

  • Check if the current object (initially the application root) has a method __before_publishing_traverse__. If so, call it with the request as an argument. This hook is used by many parts of Zope, CMF and Plone to support things like content object method aliases, setting the CMF skin from the request, or making the portal_factory tool work. This method cannot easily change the traversal path, except by modifying request['TraversalRequestNameStack'].

  • If there are more elements in the path, pop the next element.

  • Append this to the variable request['URL'], which contains the traversal URL. Various traversal tricks may mean this is not quite the same as what the user sees in their address bar, but it should be valid, traversable URL.

  • Attempt to traverse to the next object using the name popped from the path stack. This takes place in the traverseName() method of the request:

    • If the name starts with a + or an @, parse it as a traversal namespace. (A name starting with an @ is taken as a shorthand for ++view++<name>, i.e. an entry in the ++view++ traversal namespace. Other namespaces include ++skin++ and ++etc++.) If a traversal namesapce is found, attempt to look up an adapter from the current traversal object and the request to zope.traversing.interfaces.ITraversable with a name matching the traversal namespace (e.g. view). Then call its traverse() method with the name of the next entry on the traversal stack as an argument. This is expected to return an object to traverse to next. If this succeeds, acquisition-wrap the returned object in the parent object.

      Note: As this implies, objects returned from the traverse() method of an ITraversable adapter are not expected to be acquisition-wrapped. This is in contrast to objects returned by __bobo_traverse__(), __getitem__(), __getattr__(), or a custom IPublishTraverse adapter (see below), which are expected to be wrapped.

    • If there is no namespace traversal adapter, find an IPublishTraverse object in one of three places: If the current traversal object implements it directly, use that; if there is an adapter from the current object and the request to IPublishTraverse, use that; or, fall back to the DefaultPublishTraverse implementation found in ZPublisher.BaseRequest. Then call the publishTraverse() method to find an object to traverse to and return that (without acquisition-wrapping it).

      Implementing IPublishTraverse is a common way to allow further traversal from a view, with paths like ...../@@foo/some/path, where the @@foo view either implements or is adaptable to IPublishTraverse.

      DefaultPublishTraverse is used in most cases, either directly or as a fallback from custom implementations. It uses the following semantics:

      • If the name starts with an underscore, raise a Forbidden exception

      • If the object has a __bobo_traverse__ method, call it with the request and the name of the next entry on the traversal stack as arguments. It may return either an object, or a tuple of objects. In the latter case, amend request parents list as if traversal had happened over all the elements in the tuple except the last one, and treat that as the next object.

      • If the __bobo_traverse__ call fails by raising an AttributeError, KeyError or NotFound exception, attempt to look up a view with the traversal name (which would have been given without the explicit @@ prefix). If this succeeds, set the status code to 200 (the preceding failure may have set it to 404), acquisition-wrap the view if applicable, and return it.

      • If there was no __bobo_traverse__, or if it raised the special exception ZPublisher.interfaces.UseTraversalDefault, try the following:

        • Attempt to look up the name as an attribute of the current object, using aq_base (i.e. explicitly not acquiring from parents of the current object). If this succeeds, return the attribute, which is expected to be acquisition-wrapped if applicable (i.e. the parent object extends Acquisition.Implicit or Acquisition.Explicit).
        • Next, try to look up a view using the same semantics as above
        • Next, try getattr() without the aq_base check, i.e. allowing acquired attributes.
        • Next, try __getitem__() (dict-like) access.
        • If that fails, raise a KeyError to indicate the object could not be found (this is later turned into a 404 response).

      • If we now have a sub-object, check that it has a docstring. If it does not, raise a Forbidden exception.

        The requirement for a docstring is an ancient and primitive security restriction, since Zope can be used to publish all kinds of Python objects. It is mostly a nuisance these days, but note that views and custom ITraversable and IPublishTraverse traversal do not have this restriction.

      • Next, raise a Forbidden exception if traversal resolved a primitive or built-in list, tuple, set or dict - these are not directly traversable.

      • Finally, return the object

  • If a KeyError, AttributeError or NotFound exception is raised during name resolution, return a 404 response by raising an exception. Similarly, if a Forbidden exception is raised, set and return a 403 response.

  • Once the end of the path is reached, we have the most specific item mentioned in the (possibly mutated) path. However, this may choose to delegate to another object (usually a subobject) through a mechanism known as “browser default”, which is similar to the way web servers often serve an index.html file by default when traversing to a folder.

    A browser publisher is described by the interface IBrowserPublisher, which is a sub-interface of IPublishTraverse and is implemented by the DefaultPublishTraverse class. Again, the IBrowserPublisher for the traversed-to object is found in one of three ways: the object may implement it itself; or it may be adaptable, with the request, to this interface; or the fallback DefaultPublishTraverse may be used. The browserDefault() method on the IBrowserPublisher is then called with the request as an argument.

    The return value from browserDefault() is a tuple of a parent object (usually the most recently traversed-to object, i.e. self.context in the adapter) and a tuple of further names to traverse to from this parent.

    The default implementation in DefaultPublishTraverse does this:

    • If the object has a method __browser_default__(), delegate to this.
    • If an IDefaultViewName has been registered for the context in ZCML, look up and use this. This is deprecated, however.
    • Otherwise, return self.context, (), i.e. no further traversal required.

  • If a further path is returned and it has more than one element, add its elements to the TraversalRequestNameStack and continue traversal as if these elements had been part of the original path all along.

  • If there is only one element in the further path returned by browserDefault(), use this as the next entry name and continue traversal to this.

  • If no further path is used, fall back on the default method name index_html() (applicable for HTTP GET and POST requests - there is special handling of other HTTP verbs for WebDAV that we won’t go into here) and continue traversal to this.

  • If there is no index_html() method, use the traversed-to object itself as the final entry, so break out of the traversal loop. We always end up here eventually: if the browser default element or index_html() method is the last item we traverse to, eventually we reach something publishable.

    This object will most likely be called (through mapply()), so we ensure the roles used in security checks are obtained from the __call__() method the traversed-to object (note: function and method objects also have a __call__() in Python).

• Once we have reached the end of the traversal stack (phew!), we make sure the parents list is in the right order (it is built in reverse order), even if there was a failure. Hence, request['PARENTS'] is always a useful indicator of what objects have been traversed over, with the last item being the special request container and the penultimate item being the application root.

• We then set request['PUBLISHED'] to be the published callable. Note that this is usually a view or page template, though for content types like File or Image it is the index_html() method of the content object itself.

• Next, we validate that the current user has sufficient permissions to call the published object. If not, a 403 response is returned by calling response.unauthorized().

  The authentication works as follows:

  • The roles required to access the traversed-to object are fetched by calling getRoles(), first on the application root, and, if applicable, on the __call__() method of the traversed-to object.
  • A user folder (i.e. acl_users) is obtained by looking for the special attribute __allow_groups__ on the published object or one of its parents. This attribute is set by user folders on their parent container when they are added.
  • The validate() method of the user folder is called (there is a fallback called old_validate(), used if there is no user folder, but that should never happen in a modern Zope installation). This either returns a user object or None, if the user is not found in this user folder, or there is a user, but the user cannot be auhtorised according to this user folder.
  • If None is returned, the search continues up the list of traversal parents until a suitable user folder is found. If no such user folder is found, an Unauthorized exception is raised, unless there are no security declarations on the context.
  • If a user with permissions is found, and the validated_hook is set (found via get_module_info() as described above), it is called with the request and user as arguments. The standard validated_hook calls newSecurityManager() with the user, which sets the security context for the remainder of the request.
  • The user is then saved in the request variable AUTHENTICATED_USER. The true traversal path is saved in the request variable AUTHENTICATION_PATH.

• Finally, if any post-traverse functions have been registered (by using the post_traverse() method of the request to register functions and optional static arguments), they are called in the order they were registered. If any post-traverse function returns a value other than None, no further post-traverse functions are called, and the return value is used as the return value of the traverse() function, discarding the actual object that was traversed to and security check.

How does path traversal work?

Path traversal is invoked when using path expressions in page templates or action expressions (e.g. context/Title). It may be invoked explicitly in code using the methods restrictedTraverse() (which performs security checks) or unrestrictedTraverse() (which does not), defined in OFS.Traversable.Traversable and mixed into most persistent items in Zope. This is semantically similar to publication (URL) traversal as described above, but is not identical - see below.

All the logic is in the unrestrictedTraverse() method, which takes an optional argument restricted that is set to True when called via restrictedTraverse(). It takes a path string or element list as an argument, and optionally a default to return if traversal fails. If no default is specified, an exception will be raised if traversal fails. This may either be an AttributeError, KeyError or NotFound exception, depending on what type of traversal failed.

If restricted is True, unrestrictedTraverse() will perform a security check using getSecurityManager().validate() for every step of traveral. This is different to URL traversal, which only validates at the end of traversal.

The implementation does the following:

• Strip any trailing slash from the path
• If the path starts with a slash, begin traversal from the physical application root. Otherwise, start from self. If performing restricted traversal from, the application root, validate access to it.
• For each slash-separated name element of the path:
  • If the name starts with an underscore, raise a zExceptions.NotFound exception - traveral to names starting with an underscore is never allowed.
  • If the name is .., get the acqusition parent of the current traversal object and continue traversal from here after validating access if applicable.
  • Otherwise, if the name starts with a + or @, perform traversal namespace lookup as described for publication traversal above. If this throws a LocationError, fail with an AttributeError. If it suceeds, acquisition-wrap the result if possible and validate access to it if applicable before continuing traversal from this object.
  • Otherwise, if the object has a __bobo_traverse__() hook, invoke it to get the next object to traverse to. If this succeeds, validate access to the result if applicable, taking into account that it could be a method or non-security aware object, and that it may or may not be acquisition-wrapped. Then continue traversal from this object.
  • If there was no __bobo_traverse__(), or if it returned or raised the sentinel ZPublisher.interfaces.UseTraversalDefault, attempt to obtain a non-acquired attribute of the current object with the applicable name. If one is found, continue traversal from this. If security checking is being performed, use guarded_getattr() from AccessControl.ZopeGuards to get the attribute, which may raise Unauthorized. (This is the special getattr() that is also used for all attribute access by untrusted Python code.) Otherwise, use standard getattr().
  • Otherwise, attempt dict-like (__getitem__) access and validate the result if applicable before continuing traversal from this object.
  • If any of the above failed with an AttributeError, NotFound or KeyError, attempt to look up a view on the current traversal object with the given name. If one is found, acquisition-wrap it if possible and validate access if applicable, before continuing traversal from the view instance.
  • If there is no view, but there was a __bobo_traverse__, fail by re- raising the original exception. The logic behind this is that if there is a __bobo_traverse__(), we should not attempt to acquire attributes.
  • Assuming we still don’t have a value and there was no __bobo_traverse__(), attempt to acquire an attribute, using either getattr() or guarded_getattr() depending on whether security checks are being made and continue traversal from the result if this suceeds.
• If we reach the end of the path, return the most recently traversed-to object.
• If an exception of any kind (other than a ConflictError) is thrown and a default was passed in, return this rather than letting the exception bubble up to the caller.

Note: This logic does not check for the publication/request-orientated IPublishTraverse or IBrowserPublisher hooks, although they do allow traversal to a view (e.g. context.restrictedTraverse('@@some-view')).